DENALI 2.0 Plug-n-Play CANsmart Controller for BMW R1200 LC Series (DENDNL.WHS.11600)

£227.99

Description

DENALI 2.0 Plug-n-Play CANsmart Controller for BMW R1200 LC Series (DENDNL.WHS.11600)

This is the new MUST HAVE for BMW R1200GS LC and Adventure models!

We didn’t want to make just another accessory controller, we wanted to make a smarter one.

** Please note, works with new 2.0 versions of Denali Lamps.  You can purchase lamps on their own rather than full kits, call us and ask. **

Harness the power and intelligence of your vehicle’s CANbus electrical system.  The DENALI CANsmart Controller provides plug-n-play installation of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW “WonderWheel” or the CANsmart Accessory Manager Software.

The four dedicated circuits are pre-programmed to connect and independently control two sets of auxiliary lights, an auxiliary horn, and an auxiliary brake light. Each accessory circuit is electronically fused and ready to rock right out of the box.

The two auxiliary light circuits enable independent adjustment of high and low beam brightness right from the vehicles “WonderWheel”. It also features a “flash to pass” and “strobe when horn active” setting that will strobe the auxiliary lights when you pulse your high beam switch or sound your horn.

The feature-rich brake light circuit will transform a simple 2-wire brake light into a “smart brake light” complete with running light, multiple flash pattern, and deceleration activated braking functionality.

The horn circuit enables the addition of an auxiliary horn without having to add a relay and dedicated horn wiring harness.

Simple Circuit Over-Ride

Want more flexibility; we thought you might. You can set any of the four circuits to “Simple Circuit” Mode which will disable all custom circuit settings to provide a clean switched 12V circuit to power an accessory of your choice. Use this setting to power an alternative accessory in place of the dedicated DENALI accessory. The electronic fuse is the only active setting so you can properly fuse your accessory.

Available Settings in the CANsmart™ Accessory Manager Software

Auxiliary Light Set One Settings (Red/Yellow Circuit) Default
Fuse Adjusts electronic fuse setting to desired value. Fuse auto resets with vehicle ignition cycle. 10 amps
High Beam (Day Intensity) High Beam Daytime Brightness Setting 100%
High Beam (Night Intensity) High Beam Nighttime Brightness Setting 100%
Low Beam (Day Intensity) Low Beam Daytime Brightness Setting 50%
Low Beam (Night Intensity) Low Beam Nighttime Brightness Setting 50%
Strobe When Horn Active This auxiliary light set w ill strobe w hen vehicle’s horn button is pressed. ON
Strobe On “Flash To Pass” If enabled, the LED lights w ill strobe 3 times w hen the high beam is toggled 3 times within 1 second. ON
Inverse Flashing When Hazards Active This auxiliary light set w ill flash alternatively with the vehicle’s hazard lights. ON
Simple Circuit Over-Ride Disables all circuit features to supply sw itched 12v pow er to an accessory of your choice. OFF
Auxiliary Light Set Two Settings (Red/Yellow Circuit) Default
Fuse Adjusts electronic fuse setting to desired value. Fuse auto resets with vehicle ignition cycle. 4 amps
High Beam (Day Intensity) High Beam Daytime Brightness Setting 100%
High Beam (Night Intensity) High Beam Nighttime Brightness Setting 100%
Low Beam (Day Intensity) Low Beam Daytime Brightness Setting 50%
Low Beam (Night Intensity) Low Beam Nighttime Brightness Setting 50%
Strobe When Horn Active This auxiliary light set w ill strobe w hen vehicle’s horn button is pressed. ON
Strobe On “Flash To Pass” If enabled, the LED lights w ill strobe 3 times w hen the high beam is toggled 3 times within 1 second. ON
Inverse Flashing When Hazards Active This auxiliary light set w ill flash alternately with the vehicle’s hazard lights. ON
Simple Circuit Over-Ride Disables all circuit features to supply sw itched 12v pow er to an accessory of your choice. OFF
Auxiliary Horn Settings (Green Circuit) Default
Fuse Adjusts electronic fuse setting to desired value. Fuse auto resets with vehicle ignition cycle. 25 amps
Horn Enabled If enabled, the horn circuit w ill turn on w henever you press your motorcycles original horn button. ON
Simple Circuit Over-Ride Disables all circuit features to supply sw itched 12v pow er to an accessory of your choice. OFF
Auxiliary Brake Light Setting (Orange Circuit) Default
Fuse Adjusts electronic fuse setting to desired value. Fuse auto resets with vehicle ignition cycle. 2 amps
Running Light Intensity Adjusts running light brightness setting 10%
Brake Light Intensity Adjusts brake light brightness setting 100%
No Flashing Brake light w ill turn on at the set brightness w hile braking. OFF
Brake Applied Flashing (Continuous) Brake light w ill flash at 4Hz at the set brightness for as long as the brake is engaged. ON
Brake Applied Flashing (California Legal) Brake light w ill flash 4 times w hen the brakes are engaged and then stay on at the set brightness w hile braking. OFF
Auto-Flash (Deceleration Activated Flashing) Reads the vehicle deceleration to flash the auxiliary brake light automatically. Sensitivity can be adjusted in extra settings. OFF
California Legal & Auto Flash Combines the behavior of California legal flashing with the deceleration activated flashing OFF
Simple Circuit Over-Ride Disables all circuit features to supply sw itched 12v pow er to an accessory of your choice. OFF
Extra Settings Default
Adjust Auxiliary Light Flashing Intensity Adjusts strobe brightness of the auxiliary lights w hen “Strobe When Horn Active” or “Strobe On Flash To Pass” is turn on. 100%
Adjust Brake Flashing Travel Speed Threshold The minimum speed at w hich the auxiliary brake light w ill flash. (Applies to all brake flash settings.) 0km/h
Adjust Auto-Flash Deceleration Sensitivity The rate of deceleration required to active auxiliary brake auto-flashing (Applies to Auto-Flash only.) Middle

Additional information

Weight 0.6 kg
Dimensions 20 x 20 x 8 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.